I love, Love, LOVE tails! The glitz. The glamor. The razzmatazz! A garment with tails makes me want to grab a top hat and tap dance. Whoo!

I was thrilled when I came across the challenge of transforming a pretty average looking top into a sexy new tails creation! The original top had a great collar and shoulder line, so I wanted to keep those things as a feature. The bottom half of the top just hung...

So what I've done here is I've cropped off the front of the top (I finished the inside nicely with some bias tape), and then I've used the bottom of the bust lines as my guide for the line of the tails.

I found a satin skirt to cut up and use for the lower half of the garment, and the fabric which was formerly the bottom half of the top was used as lining.

Have a go and see what you come up with. It's possible to create 'tails' coats, vests and tops out of long jackets, suit jackets, dresses and probably more! As always, feel free to share your creations and post them on our Facebook page: http://www.facebook.com/revampedfashion

Do you have a plain blazer that you'd like to add some Zing! to? Today's Revamped D.I.Y will not only help you to create an original blazer which will stand out in the crowd, it will also (at least) triple the value of the blazer!

Years ago I was browsing in my favorite Adidas Originals store when I spotted an AMAZING football jersey dress by Jeremy Scott. It was covered in jewels, all silver and blue and it was absolutely divine! I've kept that dress in my memory for years and finally, I found the inspiration to incorporate the blue and silver jewels into something I can wear every day!

One day I happened to come across a royal blue blazer. I loved the colour but the blazer was so plain! Then I realized... this was it. I could finally use that Jeremy Scott inspiration and create the blingin blazer of my dreams!

What you will need:
Blazer or Jacket
Gem Rivets 
Rivet hammering tool (ask for this when you purchase the rivets)
Hammer
Chopping board
Hole punch or scissors

The plain blazer was only $50 from Cotton On. A bit of a bargain for a blazer which was a very good fit. I then headed to Birdsall Leather in Botany (they also have a great online store. Check out the link) and bought a couple of packs of rivets and the little rivet punching tool required.

I had to be careful when punching the holes in the collar of the blazer because it's a slightly stretchy material. I used a fine hole punching tool. If you don't have one of those you can gently use the end of your snips or scissors to poke a hole for the rivet to poke through.

*Keep the holes small because if the holes stretch the rivets will fall out and you'll just have a holey collar on your blazer. Eek!

Once I punched the holes, I poked the stem of the gem rivet (they call this the male part) through the hole, then, on the back side of the collar, I placed the back of the rivet (the female part) over the stem until I could hear a little 'click'. 

Next, I placed a soft piece of denim (or leather) onto the chopping board to protect the gem from getting scratched or damaged when I hammered the back on. 

I faced the gem down onto the denim, and cupped the back of the rivet with the hammering tool. I gave the tool two hard bangs with the hammer and checked that the rivet was in place.

I like to place my rivets in randomly. You might like to create a pattern. I'd love to see your creations! What other things could you decorate with rivets or studs? Please post some pictures of your Revamped D.I.Y projects on our facebook page http://www.facebook.com/revampedfashion

You can also follow us on Instagram @ revampedfashionlovesu

Over Christmas I was spending time visiting my beloved Aunty Carol in hospital. I wanted to keep her company and stay in there for as long as I could. I'm not one for sitting still for too long so I thought it would be best if I took a project in with me. We had a lovely time as I entertained her (while also feeling incredibly productive)! 

My inspiration for this design came from an amazing t-shirt by the sensational Australian design duo Sass n Bide. Ok... I'll admit it, the t-shirt I've created here is very similar in design. Making this shirt was great as it got me to explore the technique. Since creating this piece I've been researching other tribal designs and thinking of ways to transform t-shirts with my own flavor (I haven't actually worn this one as I don't like to copy).

Firstly, I bought a mens T-shirt from Target. I cut off the sleeves and trimmed down the bind on the neck (the bind is still attached but I've roughed it up a bit with the scissors).

Next I placed the T-shirt over the table in the hospital (or an ironing board will do) and started cutting the masking tape to size, and started taping out my design.

Once I was happy with my design I mixed the paint with the fabric medium (as directed on the bottle)  and I started painting the areas not taped.

* Tip: Be careful not to apply the paint too thick. It will stiffen the fabric (which is what happened with this sample I made). I would recommend painting with a slightly damp brush, and avoid painting too many layers (of paint). If there's too much paint it will bleed under the masking tape.

Once the area you want is painted, remove the masking tape and hang shirt on a clothes hanger to dry.

To create the zig-zag down the middle, once the paint has dried, tape up zig-zag lines down the centre front panels. Apply a second coat of paint and quickly shake glitter over the area before it dries. Once it's dry, remove the masking tape and shake all of the excess glitter off. 

* Tip: I shake it over newspaper so I can collect the excess and use it again.

To finish off you will need to heat-set the paint. By heat-setting it you will safely be able to put your T-shirt through the wash, knowing that your design won't wash off.

The fabric medium has instructions for how to heat-set paint. I used a regular iron and placed brown paper over the T-shirt (in between the iron and the shirt). I've been spinning this shirt through the washing machine and it's been coming up like new! Over time the glitter has worn off a bit (as I expected) so it may be worth trying to apply the glitter with a fabric glue rather than paint.

Gosh I'd love to see what designs you come up with! Please post your Revamped Tribal T's on our facebook page. Sharing your designs will inspire other Revampers to give it a try Let's revamp this planet together! :D

Welcome to my first Revamped Fashion D.I.Y. Online session! This is a segment I will be featuring weekly, to help get you in the Revamping groove even if you can't make it to one of my workshops.

This week's example of Revamped Fashion is a simple and effective method I've used to breathe life into a much loved high school formal dress.

My client brought this dress to me because she loved the colour and hoped I could somehow make it cool again. Now, my client happens to be one super hot babe who gets on stage and sings like an angel and plays guitar like Slash, so it was quite appropriate for me to transform this dress into a hot little number, worthy of being put on public display!

I decided that because the top of this dress was still very current (it has fabulous cut-outs), it would be a crime not to use it, so to modernize this wonder I simply chopped off the skirt! I left enough of the skirt (approximately 3cm) attached to the top, to double fold under to create a neat and tidy edge, and I hand stitched this fold in place into the lining.

Because my client is no longer 16, the back of the top didn't quite meet (I would say a fabulous growth spirt of cleavage would be to blame for that!), so I removed the previously placed buttons and replaced them with some rouleau* loops I had made from the remainder of the skirt.

Now the top has a new lace-up back!

*To create rouleau for the loops and the lace-up cord, cut a 3cm wide strip of fabric on the bias, fold in half and stitch. Because this fabric is stretchy its ideal to use a short stitch which has a very slight zig-zag. Use a rouleau turner to turn the cord in the right way.